The stc-1000 incubator thermostat temperature controller is perfect when used in diy homemade incubators, aquariums and cold rooms. This is a very precise temperature controller / thermostat that handles both cooling and heating. The stc-1000 incubator thermostat offers exceptional accuracy and reliability.



  • Switch the modes between cool and heat.
  • Control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration.
  • Refrigerating control output delay protection.

1.Front panel size75(L)×34.5(W)mm;
2.Mounting size:71(L)×29(W)mm;
3.Product size75(L)×34.5(W)×85(D)mm;
4.Sensor length2minclude the probe.
5.Measure range: -50°+99°C
6.Mounting size: 71*29mm
7.Auto switch between refrigerating and heating
8.Retrun difference value

Technical Parameters:
1. Temperature measuring range: -50°~99°C;
2. Resolution: 0.1°C;
3. Accuracy: ±1°C (-50~70°C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC and 220V ±10%, 50/60Hz;
6. Power consumption: less than 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60°C;
10. Storage temperature: -30~75°C;
11. Relative humidity: 20%~85% (No condensate).

Shipping time: 7 – 15 days.

Package includes:
1 x Stc-1000 Mini Digital Temperature Controller Thermostat Aquarium stc1000
1 x Temperature sensor probe
1 x Instruction Manual




Leave a Reply

Your email address will not be published. Required fields are marked *