This card reader writer is used to clone 125Khz RFID cards. It can copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purposes. It support 125Khz EM4100 / EM410X or compatible card /tag format only (HID standard NOT compatible). The card reader writer will not read encrypted cards.
Name:Handheld second generation induction buckle copy machine set
Material:Acrylonitrile Butadiene Styrene(ABS)
Supported blank tag：T5557,EM4305.
Working frequency: 125Khz
Power: Two piece AAA battery，it can be use 20,000 times (Batteries are not included)
Working status Led：Read , Power , Write
Button：Read Button，Write Button
You can copy all of the ID card, such as access cards, cell cards, parking cards.
How to clone
1.Push power switch on the right of device，it will keep two or three times，and LED is on mean it works，if not restart please.
2.Put the other card near the antenna left of the device，and then press READ button，the device will keep and the LED is on when read successful，if beep 2 times go to step 3， if beep 3 times go to step 4，click READ again if it doesn’t beep.
3.change an new blank card as T5557/EM4305，then press WRITE button，when beep PASS LED is on mean clone successful，if it doesn’t beep and light please write again.
4.Change a blank T5557，then press WRITE button，when beep PASS LED is on mean clone successful，if it doesn’t beep and light please write again.
5.Repeat step 3 or step 4 if you want to make more same ID card.
6.Switch off for save power.
Package Includes (Batteries are not included):
1 x Handle RFID Writer
6 x Keychain can be copied
6 x Cards
Free Shipping: 7 – 15 days
DHL Express Shipping: 4 – 8 days